Getting Started with the Bridge Select Extension

⚡️ How it works

A job travels through three stages. The icon beside the job in your listing tells you which stage it is at, so the listing is the only place you need to look.

The icon itself is the one below, so you know what to look for in the Actions column:

🧩 Installing the extension in Chrome

1

Open the Chrome Web Store and search for Bridge Select — the extension is published under that name.

2

Click Add to Chrome, then Add extension in the confirmation pop-up.

3

Pin the extension so it is always one click away: click the puzzle-piece icon in the Chrome toolbar and click the pin beside Bridge Select Extension.

4

Click the extension icon and sign in with the same User Name and Password you use for the portal, choosing Retailer or Trader under Login As.

➕ Adding a job from the portal

5

Go to your job listing and find the job you want registered. In the Actions column, click the grey Bridge Select Extension button.

6

Check the job in the confirmation window and click Confirm.

7

The button turns into a blue label. The job is now in the extension's queue.

✅ Adding automatically when you Check a job

If you would rather not click twice, the extension can take a job the moment you mark it Checked. Turn it on once and the Check button in your listing becomes Check & Add To Bridge Select Extension.

8

Open the Bridge Select Extension page from the status menu in the top bar, and turn on Add to Bridge Select Extension automatically when a job is marked as Checked.

9

Back in the listing, Check the job as usual. The job is added in the background — no second confirmation.

🖥️ Inside the extension panel

Click the extension icon in the Chrome toolbar to open the panel. It has four tabs:

• Current Jobs — everything waiting to be registered.
• Unchecked — jobs that are not Checked yet, so they are not eligible.
• Errors — jobs the REC Registry rejected, with the reason.
• Processed Today — what has gone through since midnight.

Registering jobs

You choose what goes to the REC Registry. Submit on a leg registers that one claim; Selected runs the jobs you have ticked, and All runs everything in the list. Nothing is sent until you press one of them.

Pause and Cancel

While a batch runs, a status bar shows how far it has got — for example Registration 3 of 18 registrations across 10 jobs. Solar and battery count separately, which is why the number of registrations is usually higher than the number of jobs.

• Pause stops the run after the registration in progress. Click Resume to carry on.
• Cancel abandons the rest of the batch. It is greyed out once a registration has reached the point where it cannot be taken back.

🔄 Resubmitting and ❌ removing

Resubmit

If the REC Registry rejects a job, the button turns green and an orange Bridge Select Extension error badge appears beside it. Hover the badge to read the reason, fix the job, then click the green button and confirm to send it again.

Remove

Added something by mistake? An orange × sits next to any job that is still queued. Click it, confirm, and the job comes straight back out of the extension — the grey Bridge Select Extension button returns and you can add it again whenever you are ready.

📥 Downloads once a job is registered

After a job shows Submitted To REC Registry, the extension's paperwork is available from the job row on the Processed tab:

• BS PVD CSV (solar), BS SWH CSV (hot water) or BS BSTC CSV (battery) — the file that was uploaded to the registry.
• BS SDP — the Sign Data Package for the job, where one was generated.

🔎 The status menu in the top bar

A Bridge Select Extension item sits in the portal's top bar with a coloured dot. Open it to see the current batch and how many jobs have gone through today, and to reach the full Bridge Select Extension page.

❓ Why is there no button on my job?

The extension only offers jobs it can actually register. If the button is missing, one of these will be the reason:

🛟 Troubleshooting

• The dot stays grey. Open the extension panel in Chrome and sign in. The portal only sees the extension while it is running.
• Nothing is processing. Check the dot is not red — the REC Registry closes overnight and for maintenance, and nothing uploads while it is closed.
• A job sits on the blue label for a long time. Open the panel and look at Current Jobs; if it is not there, remove it in the portal and add it again.
• An orange error badge. Hover it for the registry's reason, correct the job, then use the green resubmit button.
• The buttons disappeared after an update. Hard-refresh the listing (Ctrl+F5, or Cmd+Shift+R on a Mac).

For platform support, contact support@bridgeselect.com.au or visit www.bridgeselect.com.au.